Configure an ACE Ethernet VLAN ID

Use ACE Ethernet VLAN ID entries so that the filter looks for traffic on specific VLANs. You can insert an ACE Ethernet VLAN ID only for ACL VLAN types.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation pane, expand Configuration > Security > Data Path.
  2. Select Advanced Filters (ACE/ACLs).
  3. Select the ACL tab.
  4. Select the appropriate ACL.
  5. Select ACE.
  6. Select the appropriate ACE.
  7. Select Eth.
  8. Select the Vlan Id tab.
  9. Select Insert.
  10. Specify the operation type.
  11. Enter the VLAN ID or select from a list.
  12. Select Insert.

VLAN ID Field Descriptions

Use the data in the following table to use the Vlan Id tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq parameter specifies an operator for a field match condition: equal to.

VlanId

Specifies the VLAN ID on which to perform a match.

OperMask

Specifies the mask value for a VLAN attribute.